Hubbell Electric Heater Company E User Manual download pdf (Page 18)

SURFACE MOUNTED THERMOSTAT

1. Disconnect power from unit.

2. Remove access cover and locate thermostat.

3. Disconnect the two (2) or three (3) 14 gauge wires and jumpers, as required.

Control Wires

4. Remove two (2) mounting screws and disconnect from high limit cut-off, if required.

Mounting Screws

5. Replace thermostat using the reverse procedure.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23

No comments

Hubbell Electric Heater Company E User Manual Page 18