Hubbell Electric Heater Company T User Manual download pdf (Page 2)

HUBBELL

ELECTRIC HEATER COMPANY

P.O. BOX 288

STRATFORD, CT 06615

PHONE: (203) 378-2659

FAX: (203) 378-3593

INTERNET: http://www.hubbellheaters.com/

-- IMPORTANT --

Always reference the full model number and serial number when calling the factory.

WARNING / CAUTION

1. Tank is to be completely filled with water and all air is to be vented before energizing.

2. Due to the rigors of transportation, all connections should be checked for tightness before heater

is placed in operation.

3. Safety relief valve must be installed in tapping provided.

4. KEEP AWAY FROM LIVE ELECTRICAL CIRCUITS.

Do not perform any maintenance, make any adjustments, or replace any components inside the

control panel with the high voltage power supply turned on. Under certain circumstances,

dangerous potentials may exist even when the power supply is off. To avoid casualties, always

turn the power supply safety switch to off, turn the charge or ground the circuit before

performing any maintenance or adjustment procedure.

5. The unit is designed to operate at pressure not more than 150 psi.

6. Generalized instructions and procedures cannot anticipate all situations. For this reason, only

qualified installers should perform the installations. A qualified installer is a person who has

licensed training and a working knowledge of the applicable codes regulation, tools, equipment,

and methods necessary for safe installation of an electric resistance water heater. If questions

regarding installation arise, check your local plumbing and electrical inspectors for proper

procedures and codes. If you cannot obtain the required information, contact the company.

1 2 3 4 5 6 7 ... 25 26

No comments

Hubbell Electric Heater Company T User Manual Page 2